Fogmaster Logo We make the Foggers that make your life Easier... Fogger
Home About Us Products Applications FAQ Support Contact Us Fogger
Water Droplets image 01 image 02 image 03 Fogger
Fogger
  Fogger
  Hand Held FoggersDrum Mounted Foggers

Pow-R-Jet® DM 6329

Pow-R-Jet® Plus DM 6428

Micro-Jet® ULV DM 7421

Sewr-Jet™ DM 4180

High-Jet™ DM 3290

 

Sentinel Modular Foggers
Custom Units
Parts Accessories

 

 
Sewr-Jet™ DM 4180

The remote discharge of the Sewr-Jet™ DM 4180 makes it ideal for odor control in hard-to-reach locations. Its tiny fog particles, with their vast surface area for efficient gas contact, provide high removal rates at low chemical cost.

The anti-siphon design and corrosion resistant nozzle of the 4180 are particularly suited for such below-grade applications as sewer lift stations and holding tanks. The nozzle may be suspended from above, attached to a pit cover, or mounted through a side wall.

Available in three hose lengths, the 4180 can be controlled manually, or automatically with a repeat cycle timer (see accessories) or gas monitor.

Like all Fogmaster's drum mounted units, it's a breeze to set up. Just screw the power head into your chemical container (it fits the standard bung openings of 30 and 55 gallon drums), adjust the valve for desired particle size (anything from a dry fog to a wet mist) and aim the output.

The 4180 is well suited for maintenance and repair operations -- portable, reliable and easy to care for. Just hose off the nozzle between jobs, clean the intake filter as needed, and change motor brushes when they wear out (600 hour estimated lifetime).

Sewr-Jet™ DM 4180 ... another effective solution from Fogmaster.


 

Sewer-Jet™ DM 4180

Motor

1 Hp, 50/60Hz
418010: 120V, 7 amp
418020: 220-240V, 3.5 amp
MS™ motor saver brushes standard

Motor Brushes Motor brushes are a wear part and must be replaced when worn (estimated life - 600 operating hours). Product includes standard MotorSaver™ brushes to protect commutator as brushes reach end of life.
Blower Balanced fan, 2 stage, 20,000 rpm (no load)
Fogging Nozzle High shear, counter rotating vortex
Non-clogging design (no tiny orifices)
Hose 15' & 25' lengths available (specify)
Particle Size 7-30 micron VMD, adjustable
Liquid Flow Rate 9 turn vernier valve with memory lock
0-9 oz/min [0-270 ml/min]
Chemicals Handles both oil- and water-based chemical solutions
(Liquid viscosity and density affect particle size distribution)
Liquid Reservoir Capacity
Attaches to standard bung opening of most 15-, 30- or 55-gallon chemical drums (drum not included)
Materials of
Construction
Power head housing and drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Control valve - glass filled nylon, stainless stem, Viton® seal
Hose - vinyl
Nozzle assembly - Celcon w/ vinyl housing
Hose clamps and mounting hardware - stainless
Regulatory Compliance UL, CSA, CE, PSE
Dimensions H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Shipping Weight Power head - 12 pounds
Hose/nozzle assembly - 7 or 10 pounds
Warranty One year
  Download

Sewr-Jet™ DM 4180
Spec Sheet

Operating Manual
English
Spanish
French

 

Click Here to Download the Adobe Acrobat Reader

Download Acrobat Reader
to view files on this site

 

Made in the USA

    Home | About Us | Products | Applications | FAQ | Support | Contact Us