High-Jet 3290

Fog character, controlled by a valve on the power head, is adjustable from a ULV (ultra low volume) dry fog (7-12 micron VMD) to a heavy wet mist (30+ micron size). High-Jet units are thus well suited to a wide range of applications, including odor control, pest control, sanitizing, moistening, dust control and humidification.

The power head screws into a standard 2" NPT drum opening. It is offered in 120 and 240VAC versions, and includes a 9 foot power cord. A solenoid valve keeps lines charged and prevents chemical loss due to siphoning. And like all Fogmaster units intended for heavy-duty use, it incorporates a motor saver brush to prevent commutator damage at the end of the brush's life.

High-Jet foggers can be specified in several hose length and nozzle end options. One option provides a thumb operated fog ON-OFF switch at the wand so you can fog only target areas, without treating the entire room or wasting chemical. The valve can also be set for continuous output, if desired, for unattended operation.

The discharge height of the High-Jet is limited to its suction lift (about six feet above liquid height). For higher lifts, use the model 6300 Pump-R boost pump (shown in picture). A timer such as the 2238 repeat cycle timer is also helpful for labor savings and more efficient chemical use in situations requiring repeated fogging.

High-Jet 3290 ... another effective solution from Fogmaster.

SPECIFICATIONS