Product Summary

---

Hand-Held Fogging Units

• Micro-Jet^® ULV
• Pow-R-Jet^®
• Fogmaster Tri-Jet^®
• Noz-L-Jet^(TM)
• Fogmaster jr

Drum Mounted Fogging Units

• Micro-Jet^® DM
• Pow-R-Jet^® Plus DM
• Pow-R-Jet^® DM
• Sewr-Jet ^(TM)
• High-Jet ^(TM)

Sentinel II ^(TM) Modular Fog Heads

Larger, more powerful heads (fog discharge units) designed for permanent installation. Attach to wall, post or ceiling. Low liquid pressure (10-50 psi), so no expensive piping required). Multiple heads can be supplied from a central reservoir. Heads are activated by liquid feed pressure (no control wiring needed).

Power Heads

• 5500 Power Head (standard 2 nozzle head with air filter, for normal conditions)
• 5600 Hose Discharge Power Head (for confined spaces or "spot" fogging. Includes air filter.) Useful for fogging into lift stations, HVAC ducting, discharge stacks, clean rooms, etc.
• 5700 Power Head for "Extreme" Conditions (2 nozzle, plus air port for connection to clean air ducting). Includes check valves on discharge nozzles to minimize backflow of corrosive gases into motor chamber. Recommended for corrosive or dusty environments where frequent filter changes would be impractical.

Integrated Systems

• The 5850 humidification system features a low maintenance regenerative blower, a control module which monitors humidity and cycles the system on as required, and a fogging nozzle. Each component can be place where most convenient, independently of the others. The fogging nozzle attaches to 2-inch PVC low pressure pipe (not included) running from the blower.

  The humidity controller has a LED readout of relative humidity which updates every second. Target humidity is adjusted by twisting a knob and observing the setpoint in the LED display. All components necessary for installation (except air pipe) are shipped with the product, including a 25-foot cable for the humidity sensor.

  Call or email to receive detailed description and specifications by fax or email (PDF attachment).

• Liquid feed options include a low pressure pump (supports one power head only), third party centrifugal pumps, gravity feed from a tank and direct connection to the building water supply. Typical liquid feed pressure is 10 psi (heads switch on at 2-3 psi).
• Products requiring dilution before application may be batch mixed in a feed tank or reservoir, or diluted in-line with a proportional injector. Fogmaster offers in-line mixers capable of 1:500 dilution ratios, with flows as low as 0.1 gpm. Contact factory for options.
• Liquid controllers (with countdown and repeat cycle timers) are available from Fogmaster. Power heads are also compatible with such third party control devices as weather stations, gas monitors, environmental controllers, timers and condition sensors. You can control all heads at once, or control individual fog heads via solenoid valves on liquid feed lines.

Custom Units

Accessories & Parts

Maintenance, Repair & Warranty Information