Sentinel II 5500
Designed for odor control, and for simple, low-cost installation.
It only takes three steps: Attach the weatherproof enclosure to a wall, ceiling or post. Connect the liquid feed line (low pressure, 3/16" ID tubing). Plug into an electrical outlet. Your power head is ready to operate.
No control wiring is needed. The power head activates when it senses liquid feed. And since the liquid supply operates at low pressure (10-60 psi), there is no investment in piping. If your needs change, relocate heads, or add more. Just connect to the liquid supply and plug in.
There are many ways to control system operation -- a manual valve on the supply line, a repeat cycle timer, an odor monitor, weather station or any other device able to trigger a relay. Liquid can be supplied by a small transfer pump or a solenoid valve to the house water supply.
Because power heads respond to liquid feed pressure, you can control individual units with simple toggle valves in their feed lines. And it's easy to construct more elaborate control systems with timers, solenoid valves or condition sensors.
For more information on setting up a Sentinel II system, please see our Technical Design Notes page or contact the factory. And see liquid transfer and timing components for some of the accessories which can be used with Sentinel II power heads.
SPECIFICATIONS
| Motor | 1 Hp, 120VAC 50/60HZ, 10 amp; Optional: 240VAC, 5 amp
Motor saver brush standard. 9 ft 18/3 power cord. | |
| Blower | Tangential discharge. Two stage balanced fan, 60 cfm, 20,000 no load rpm. | |
| Nozzle Technology | Counter-rotating vortex design. High turbulence in nozzle shears feed liquid into fog-sized droplets (7-30 micron VMD). Droplet size distribution is influenced by liquid viscosity, surface tension, density and feed rate. | |
| Nozzles | Two. Non-clogging design (no small orifices). Fully adjustable angle and discharge direction. | |
| Chemicals | Any lightweight liquid. Nozzles can atomize both oil-based and water-based fluids. | |
| Particle Size | 7-30 µ, adjustable. | |
| Control Valve | Nine turn vernier w/ memory lock.
Glass filled nylon w/ stainless stem and seat, Viton® seals | |
| Discharge Rate | 0-20 oz [600 ml] /min, adjustable | |
| Intake Filter | Serviceable air cleaner | |
| Materials of Construction |
Enclosure - NEMA 4 (weathertight, corrosion resistant) fiberglass w/ stainless hardware
Nozzle housing - corrosion resistant vinyl w/ stainless clamps Tubing - fuel and oil resistant vinyl Fittings - brass, acetal Nozzle - Celcon® | |
| Dimensions | Height (incl filter): 28 in [71 cm]
Width (enclosure only): 14 in [36 cm] Width (max nozzle extension): 34 in [86 cm] Depth: 8.8 in [22 cm] | |
| Shipping Weight | 30 lb [14 kg] | |
| Warranty | One year limited warranty |
Always read and follow use instructions
on the chemical label.
| Home | Products | Applications | Technical and Company Info |
FAQ | Response Form |