Sentinel II 5700
The 5700 power head is designed for tough areas - where corrosive gases challenge conventional materials, or airborne dust would quickly clog a filter.
Interior components are protected by the gasketed weathertight housing, check valves in nozzle lines and a 2-inch collar for ducted clean air. Simply bolt or hang the NEMA 4 enclosure to a wall or ceiling, plug into a power outlet and attach a low pressure liquid feed line. The fogger is ready to operate.
Intake air is drawn from user-supplied ducting leading to clean air. No fan is necessary, but ducting must be properly sized for air flows (consult factory if in doubt). Also, if unit will be operated in freezing environments, we suggest that ducting be routed so intake air is tempered somewhat.
The power head activates when it detects liquid feed; no control wiring is needed. When your needs change, relocate heads or add more. Just connect liquid and air sources.
There are lots of ways you can set up the liquid feed/control system - pump from a barrel, mix in-line with a proportional injector or feed house water supplied through a solenoid valve ... and control everything with a timer, gas monitor or even a weather station.
For more information on setting up a Sentinel II system, please see our Technical Design Notes page or contact the factory. The accessories page also lists some of the liquid transfer and timing components that can be used with Sentinel II power heads.
SPECIFICATIONS
| Motor | 1 Hp, 120VAC 50/60Hz, 10 amp; 240VAC, 5 amp available
Motor saver brush standard. 9 ft 18/3 power cord. | |
| Blower | Tangential discharge. Two stage balanced fan, 50 cfm, 20,000 no load rpm. | |
| Nozzle Technology | Counter-rotating vortex design. High turbulence in nozzle shears feed liquid into fog-sized droplets (7-30 micron VMD). Droplet size distribution is influenced by liquid viscosity, surface tension, density and feed rate. | |
| Nozzles | Two. Non-clogging design (no small orifices). Nozzle air check valves protect interior components from backflow of ambient air. Fully adjustable angle and discharge direction. | |
| Air Intake | 2 inch flexible coupling w/ stainless clamp for connection to clean air ducting. | |
| Chemicals | Any lightweight liquid. Nozzles can atomize both oil-based and water-based fluids. | |
| Particle Size | 7-30 microns, adjustable. | |
| Control Valve | Nine turn vernier w/ memory lock.
Glass filled nylon w/ stainless stem and seat, Viton® seals | |
| Discharge Rate | 0-20 oz [600 ml] /min, adjustable | |
| Intake Filter | User provided as required | |
| Materials of Construction |
Enclosure - NEMA 4 (weathertight, corrosion resistant) fiberglass w/ stainless hardware
Hose and nozzle housing - corrosion resistant vinyl w/ stainless clamps Tubing - fuel and oil resistant vinyl Fittings - brass, acetal Nozzle - Celcon® | |
| Dimensions | Height (incl collar): 20 in [51 cm]
Width (enclosure only): 14 in [36 cm] Width (max nozzle extension): 42 in [107 cm] Depth: 8.8 in [22 cm] | |
| Shipping Weight | 30 lb [14 kg] | |
| Warranty | One year limited warranty |
Always read and follow use instructions
on the chemical label.
| Home | Products | Applications | Technical and Company Info |
FAQ | Response Form |